international CAN Conference 2024: iCC (2024)

Table of Contents
May 14 and 15, 2024 Baden-Baden, Germany About Organized by Sponsored by iCC registration iCC opening Keynote ChairpersonHolger Zeltwanger CAN in Automation From FlexRay to CAN-XL: Migrating real-timehigh-performance networks into the future Session I: Network design ChairpersonReiner Zitzmann CAN in Automation Cable layout and CAN transceivers for higher bit rates CAN XL physical layer network design What information can eye diagrams provide for CAN? Session II: Functional safety ChairpersonChristian Schlegel CSC Enhancing functional safety in CAN/CANopendata communication for industrial machines Functional safety solutions: SAE J1939-76 (CAN)and SAE J1939-77 (CAN FD) Message end-to-end protection for small monolithic devices Session III: Security ChairpersonDr. Pavel PisaCzech Technical University in Prague Security concepts with CAN XL Security requirements for vehicle security gateways Making marine applications based on NMEA 2000 robust to cyberattacks Session IV: Software ChairpersonDr. Ken Tindell JK Energy Linux CAN XL support and programming Scheduling of CAN frame transmission when multiple FIFOs with assigned priorities are used in RTOS drivers CAN-based bootloaders: Advantages and disadvantages of CANopen, J1939 DM17, J1939 CAM11/CAM21, and UDS bootloaders Session V: System design ChairpersonHolger Zeltwanger CAN in Automation Relation of throughput and latency in CAN andPLCA networks The power of CAN partial networking in thesoftware-defined electrical vehicles Dual-modular redundancy for CAN networks Session VI: Application ChairpersonChristian Schlegel CSC CANopen host controller – today and tomorrow Use-case study: Automated testing of a CANopenNMT server device CAN-based body builder networks for commercial vehicles Session VII: CAN XL network design ChairpersonMagnus-Maria HellInfineon Technologies CAN XL system design – about clock tolerancesand margins for physical-layer effects CAN XL in-vehicle network validation Investigation of CAN-XL EMC performance at car level Program committee Sponsorship Tabletop exhibition Previous iCCs
  • About
  • Sponsors
  • iCC registration
  • iCC program
  • Program committee
  • Sponsorship
  • Tabletop
  • Previous iCCs
international CAN Conference 2024: iCC (1)

May 14 and 15, 2024

Baden-Baden, Germany

About

The international CAN Conference acts as an unrivaled platform for presenting the latest CAN, CAN FD, CAN XL developments. Experts from all over the world and from most diversified application areas have met for years at this international event.

The conference is unique in its target group and it offers participants the possibility to become acquainted with the latest developments in CAN. The iCC is the event for presenting and discussing CAN-based research and experiences, with international experts, from several application fields.

Organized by

Sponsored by

international CAN Conference 2024: iCC (3)
international CAN Conference 2024: iCC (4)
international CAN Conference 2024: iCC (5)

iCC registration

Non-members

  • Conference

650,00 € 773,50 €

750,00 € 892,50 €

Register

CiA members

  • Conference

525,00 € 624,75 €

600,00 € 714,00 €

Register

Co-speakers

  • Conference

400,00 € 476,00 €

460,00 € 547,40 €

Register

09:15

iCC opening

Holger ZeltwangerCAN in Automation

Keynote

ChairpersonHolger Zeltwanger CAN in Automation

09:30

From FlexRay to CAN-XL: Migrating real-time
high-performance networks into the future

Marko MochCariad

Session I: Network design

ChairpersonReiner Zitzmann CAN in Automation

10:30

Cable layout and CAN transceivers for higher bit rates

Kent LennartssonKvaser

11:00

CAN XL physical layer network design

Magnus-Maria HellInfineon Technologies

11:30

What information can eye diagrams provide for CAN?

Thomas StueberTeledyne LeCroy

Session II: Functional safety

ChairpersonChristian Schlegel CSC

13:30

Enhancing functional safety in CAN/CANopen
data communication for industrial machines

Thilo SchumannCAN in Automation

14:00

Functional safety solutions: SAE J1939-76 (CAN)
and SAE J1939-77 (CAN FD)

Travis BreitkreutzCaterpillar

14:30

Message end-to-end protection for small monolithic devices

Fred RennigSTMicroelectronics

Session III: Security

ChairpersonDr. Pavel PisaCzech Technical University in Prague

15:30

Security concepts with CAN XL

Peter DeckerVector Informatik

16:00

Security requirements for vehicle security gateways

Ben GardinerNational Motor Freight Traffic Association

John MaagCummins

Dr. Ken TindellJK Energy

16:30

Making marine applications based on NMEA 2000 robust to cyberattacks

Dr. Chris QuigleyWarwick Control Technologies

Session IV: Software

ChairpersonDr. Ken Tindell JK Energy

08:30

Linux CAN XL support and programming

Dr. Oliver HartkoppVolkswagen

09:00

Scheduling of CAN frame transmission when multiple FIFOs with assigned priorities are used in RTOS drivers

Michal Lenc, Dr. Pavel PisaCzech Technical University

09:30

CAN-based bootloaders: Advantages and disadvantages of CANopen, J1939 DM17, J1939 CAM11/CAM21, and UDS bootloaders

Torsten Gedenkemotas embedded communication

Session V: System design

ChairpersonHolger Zeltwanger CAN in Automation

10:30

Relation of throughput and latency in CAN and
PLCA networks

Christoffer MathiesenKvaser

11:00

The power of CAN partial networking in the
software-defined electrical vehicles

Mike van HaareNXP Semiconductors

11:30

Dual-modular redundancy for CAN networks

Uwe KoppeMicroControl

Session VI: Application

ChairpersonChristian Schlegel CSC

13:30

CANopen host controller – today and tomorrow

Reiner ZitzmannCAN in Automation

14:00

Use-case study: Automated testing of a CANopen
NMT server device

Carina HeinrichFriedrich Lütze

14:30

CAN-based body builder networks for commercial vehicles

Richard MoserPalfinger

Session VII: CAN XL network design

ChairpersonMagnus-Maria HellInfineon Technologies

15:30

CAN XL system design – about clock tolerances
and margins for physical-layer effects

Dr. Arthur MutterRobert Bosch

16:00

CAN XL in-vehicle network validation

Ayat Taleb Alashkar, Christopher WalkhoffC & S group

16:30

Investigation of CAN-XL EMC performance at car level

Frank SchadeVolkswagen

Program committee

international CAN Conference 2024: iCC (6)

Prof. Dr. Gianluca Cena

IEIIT-CNR
international CAN Conference 2024: iCC (7)

Magnus-Maria Hell

Infineon Technologies
international CAN Conference 2024: iCC (8)

Kent Lennartsson

Kvaser
international CAN Conference 2024: iCC (9)

Dr. Arthur Mutter

Robert Bosch
international CAN Conference 2024: iCC (10)

Dr. Pavel Pisa

FEL ČVUT
international CAN Conference 2024: iCC (11)

Christian Schlegel

Christian Schlegel Consulting
international CAN Conference 2024: iCC (12)

Dr. Kenneth Tindell

JK Energy
international CAN Conference 2024: iCC (13)

Holger Zeltwanger

CAN in Automation

Sponsorship

Take the opportunity and present your company as sponsor to an interested audience at iCC. CiA invites you to sponsor the 18th international CAN Conference 2024, in Baden-Baden.

Companies sponsoring the iCC 2024 appear in all conference materials, get free access to the conference and can take part in the tabletop exhibition. Additionally, sponsoring companies take part in the program committee.

For details regarding sponsorship, please contact CiA office:
Phone: +49-911-928819-22
email: conferences(at)can-cia.org

Tabletop exhibition

CiA invites you to take part in the tabletop exhibition. Take the opportunity and discuss your latest developments and solutions in the application field of CAN devices, software, semiconductors, and tools with experts in CAN-based networking.

Tabletop exhibitions complete the technical content of the speeches at conferences with the shown products. They are the place for meeting international experts, discussing new projects, and exchanging experiences. From the beginning the CAN community used the iCC tabletop exhibition as the opportunity for networking.

For details regarding the tabletop exhibition, please contact CiA office:
Phone: +49-911-928819-22
email: conferences(at)can-cia.org

Previous iCCs

In recent years, the focus of the conference has shifted. In the beginning, the focus was on theoretical presentations on the CAN physical layer, implementations of CAN controllers, and the CAN application layers. Soon, presentations on practical topics such as configuration and diagnostic tools enriched the conference program. Of course, the conference has been highlighting the further developments of CAN, such as CAN FD, CAN FD Light, or CAN XL. In addition, the conference program is complemented by topics relevant to embedded networks, such as safety, security, testing, power management, etc.

  • 17th iCC 2020 (Online only)
  • 16th iCC 2017 (Nuremberg, Germany)
  • 15th iCC 2015 (Vienna, Austria)
  • 14th iCC 2013 (Paris, France)
  • 13th iCC 2012 (Hambach castle, Germany)
  • 12th iCC 2008 (Barcelona, Spain)
  • 11th iCC 2006 (Stockholm, Sweden)
  • 10th iCC 2005 (Rome, Italy)
international CAN Conference 2024: iCC (2024)
Top Articles
Latest Posts
Article information

Author: Lilliana Bartoletti

Last Updated:

Views: 6242

Rating: 4.2 / 5 (73 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Lilliana Bartoletti

Birthday: 1999-11-18

Address: 58866 Tricia Spurs, North Melvinberg, HI 91346-3774

Phone: +50616620367928

Job: Real-Estate Liaison

Hobby: Graffiti, Astronomy, Handball, Magic, Origami, Fashion, Foreign language learning

Introduction: My name is Lilliana Bartoletti, I am a adventurous, pleasant, shiny, beautiful, handsome, zealous, tasty person who loves writing and wants to share my knowledge and understanding with you.